Our range of automatic and manual wet blasting machines (or vapor blasting machines) for finishing additive manufactured (AM) components is designed to fulfill the requirements of manufacturers in all industries using AM technologies, including the medical, aerospace, automotive, and defence industries.
Puma + with barrel - Our fully automatic wet blasting machine designed for the rapid finishing of AM components. AM components are loaded into a 350mm diameter x 270mm deep barrel (a larger 500mm diameter x 270mm deep barrel is available for larger loads) and blasted by up to 2 blast guns for the 350mm barrel and up to 4 blast guns for the 500mm diameter. Components are rapidly finished. Rinse and air guns remove any residual media and dry the components.
Puma with barrel - Our manual wet blasting machine with barrel for multiple smaller AM components and working area for larger components. AM components are loaded into a 260mm diameter x 260mm deep barrel and blasted by a single-blast gun. A timer is set for the duration of the blast required. Larger components can be blasted outside of the barrel. A 500mm diameter turntable can be specified to make rotation of larger components easier. Rinse and air guns remove any residual media and dry the components.
Vapormate - Our compact manual wet blasting machine with a large working area. The Vapormate has a particularly compact footprint of W735 x H1,664 x D810mm. It is compact enough to fit through a standard doorframe but has a large working area of W680 x H520 x D680 that accommodates all but the very largest of AM components. Like all our wet blasting machines it is fully featured with air pressure control and rinse and air guns to ensure users achieve the perfect finish.
See the Puma + with barrel and Vapormate at Formnext, stand C49, Hall 12, Frankfurt. 7-10 November. We have a number of visitor passes available that allow you free access to the exhibition (normally 109 Euros) contacts us if you would like one for you and your colleagues.
